DISON NEW PRODUCT: DS‑ALS02 Double Suction Cup Device For Washing Labels Attaching for All Overlockers
In today’s fast‑paced garment manufacturing, every second counts – especially when attaching care labels during overlocking. Manual label handling is tedious, error‑prone, and slows down your entire line.
That’s why we’re excited to introduce the DS‑ALS series of automatic washing label feeding devices. While the DS‑ALS01 (single suction cup) remains a reliable workhorse for single‑label applications, the new DS‑ALS02 takes efficiency to the next level with its dual‑suction‑cup design – allowing you to feed 2‑3 labels at once for multi‑page care instructions.
Best of all – both models now work seamlessly with every overlock machine brand, thanks to our upgraded universal control system.
DS‑ALS01 vs. DS‑ALS02 – Which One Fits Your Production?
| Feature | DS‑ALS01 | DS‑ALS02 |
|---|---|---|
| Suction cups | Single | Double |
| Label capacity per cycle | 1 label (≤6 cm size) | 2‑3 labels (pre‑fixed stack) |
| Best for | Simple single care labels | Multi‑label sets (e.g., wash + composition + origin) |
| Pre‑fixing required? | No | Yes – labels must be lightly tacked together before feeding |
| Independent control | ✅ Yes | ✅ Yes |
| Auto‑presser‑foot compatible | ✅ Recommended | ✅ Highly recommended |
Both units share the same intelligent control box – no need to modify your overlocker’s mainboard. Installation takes minutes, and you can switch between machines with minimal downtime.
Universal Compatibility – No Brand Restrictions Anymore
Earlier versions were limited to specific brands, but we’ve redesigned the electronic control system to work with all overlockers – whether you run:
-
JUKI (all series)
-
Yamato (all series)
-
Pegasus (all series)
-
Domestic Chinese integrated overlockers (any make or model)
✅ The feeding logic and suction timing are brand‑agnostic – they adapt to any machine’s cycle.
🔧 Critical Installation Requirement: External Air Compressor
This applies to BOTH models.
-
Can I install this on a traditional mechanical overlocker?
YES, you can! However, traditional mechanical machines do not have built-in pneumatic systems. -
What you MUST have: An external air compressor (air supply) connected to the device to generate the vacuum suction. This is non-negotiable – the suction cups will not work without external compressed air.
💬 If you are interested, please feel free to contact us.
facebook://www.facebook.com/disonsewmachine
youtube:www.youtube.com/@CHINADISON
📧 E-mail: info@chinadison.com
DS-Q1 Fully Automatic Tagging Machine